Титан һәм Титан аллой өлөштәре

Professional CNC processing, titanium alloy, aluminum, steel parts, we can process all parts, parts application areas: new energy, semiconductor, medical, fields, welcome to inquire.

Pošaljite upit

Chat Sada

Uvod u proizvod

Tungsten-cobalt carbide cutting tools should be used as much as possible. Tungsten-cobalt carbide cutting tools have the characteristics of high strength and good heat transfer. They are not easy to produce chemical changes with titanium in high-temperature environments, and are suitable for processing titanium metal. Effectively select some main parameters of the CNC blade. In order to reduce the cutting temperature and reduce the bonding of the CNC blade, the deflection angle of the CNC blade should be appropriately reduced, and the heat should be removed by adding the contact area between the cutting and the rake face; at the same time, the CNC blade should be enlarged. The rake angle of the blade reduces the situation of CNC blade bonding and the reduction of CNC machining precision of the machined surface due to the contradictory contact between the rebound force of the processed surface and the flank surface of the CNC blade; the curved connection of the sharp knife should be used to strengthen the compression resistance of the CNC blade strength. When processing titanium metal, it is necessary to sharpen the CNC blade frequently to ensure its sharp edge shape and successful milling.

Appropriate cutting parameters, you can refer to the following plan to determine the cutting parameters: relatively low cutting amount - high cutting speed will also lead to a sharp increase in cutting temperature; moderate cutting speed - large feed rate will lead to high cutting temperature and low cutting speed The cutting edge has been drilled in the hard bottom layer for a long time and the damage is accelerated; the relatively large cutting depth-the sharp knife bypasses the titanium surface hard bottom layer and drills to extend the life of the CNC blade. The working pressure of cutting oil and flow will be high during processing, and the processing area needs to be fully and continuously dissipated to reduce the cutting temperature.